消毒灭菌的电离辐射与电磁辐射等物理技术比较分析北大核心CSCD

消毒灭菌技术广泛应用于食品工业、医疗领域、水处理等方面。相对于传统化学和热效应的消毒灭菌方法,γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等物理手段具有不污染环境、消毒灭菌温度低、没有化学残留物等优点而日益受到重视。但这些物理技术手段各有不同,本文首先介绍了γ射线、X射线、电子束、微波、低温等离子体、紫外线、高压脉冲电场等消毒灭菌的技术原理,然后对比了各自优缺点和应用领域。每种方法都有优势和不足,应针对不同的消毒灭菌对象而选择不同的方式。最后,展望了消毒灭菌的发展方向,提出了消毒灭菌在家庭日常消毒、医疗垃圾处理、有人状态下的室内空气消毒等方面的迫切需求。     

Improving signal-to-noise ratio for the forensic analysis of glass using micro X-ray fluorescence spectrometry

Micro X-ray fluorescence spectrometry (μXRF) is a standard technique used for the elemental analysis of glass fragments in forensic casework. The glass specimens encountered in casework are usually small (<1 mm), thin fragments that are partially transparent to the exciting X-ray beam. In addition to providing fluorescence from the small glass fragments, the primary beam X-rays can scatter within the chamber and provide noise in the measurements. To reduce scatter from the sample stage, the fragments are typically mounted on a thin plastic film and raised on an XRF sample cup (≤3 cm in height). However, at these heights, there may still be significant scatter from the sample stage, which adversely affects the signal-to-noise ratio (SNR) and the limit of detection (LOD). A plastic mount was designed and 3D-printed in-house to allow fragments to be raised as high as possible from the sample stage, thereby minimizing stage scatter. Most elements detected in glass showed an improvement in the SNR when using the 3D-printed mount for analyses. The greatest improvement (>30%) was observed for lower atomic number elements (Na and Mg) and higher atomic number elements (Sr and Zr). Another simple method to improve SNR is the use of primary beam filters; when using primary beam filters during analyses, elements with characteristic lines in the high-energy range (Rb, Sr, and Zr) showed the greatest improvement (>70%) in SNR. The impact of both strategies for the improvement of SNR is presented here.     

Acoustic radiation force on an elastic cylinder in a Gaussian beam near an impedance boundary

Acoustic radiation force (ARF) is studied by considering an infinite elastic cylinder near an impedance boundary when the cylinder is illuminated by a Gaussian beam. The surrounding fluid is an ideal fluid. Using the method of images and the translation-addition theorem for the cylindrical Bessel function, the resulting sound field including the incident wave, its reflection from the boundary, the scattered wave from the elastic cylinder, and its image are expressed in terms of the cylindrical wave function. Then, we deduce the exact equations of the axial and transverse ARFs. The solutions depend on the cylinder position, cylinder material, beam waist, reflection coefficient, distance from the impedance boundary, and absorption in the cylinder. To analyze the effects of the various factors intuitively, we simulate the radiation force for non-absorbing elastic cylinders made of stainless steel, gold, and beryllium as well as for an absorbing elastic cylinder made of polyethylene, which is a well-known biomedical polymer. The results show that the impedance boundary, cylinder material, absorption in the cylinder, and cylinder position in the Gaussian beam significantly affect the magnitude and direction of the force. Both stable and unstable equilibrium regions are found. Moreover, a larger beam waist broadens the beam domain, corresponding to non-zero axial and transverse ARFs. More importantly, negative ARFs are produced depending on the choice of the various factors. These results are particularly important for designing acoustic manipulation devices operating with Gaussian beams.     

Controllably asymmetric beam splitting via gap-induced diffraction channel transition in dual-layer binary metagratings

In this work, we designed and studied a feasible dual-layer binary metagrating, which can realize controllable asymmetric transmission and beam splitting with nearly perfect performance. Owing to ingenious geometry configuration, only one meta-atom is required to design for the metagrating system. By simply controlling air gap between dual-layer metagratings, high-efficiency beam splitting can be well switched from asymmetric transmission to symmetric transmission. The working principle lies on gap-induced diffraction channel transition for incident waves from opposite directions. The asymmetric/symmetric transmission can work in a certain frequency band and a wide incident range. Compared with previous methods using acoustic metasurfaces, our approach has the advantages of simple design and tunable property and shows promise for applications in wavefront manipulation, noise control and one-way propagation.     

纵横载荷作用下功能梯度梁的弯曲和过屈曲

基于一阶非线性梁理论和物理中面概念,导出了纵横向载荷作用下功能梯度材料(FGM)梁非线性弯曲和过屈曲问题的控制方程,并获得了该问题的精确解;据此解研究了梯度材料性质、外载荷、横向剪切变形以及边界条件等因素对功能梯度材料梁非线性力学行为的影响,分析中假设功能梯度材料性质只沿梁厚度方向,并按成分含量的幂指数函数形式变化。结果表明:纵横载荷共同作用下,功能梯度梁的弯曲构形将有无限多个;随着梯度指数的增大,梁的变形减小,临界载荷升高;随着长高比的增大,横向剪切变形的影响减小。     

Spatially restricted Double Z-Simplified Box Orbital basis sets: Optimization and comparison with some standard basis sets

As part of previous studies, we introduced a new type of basis function named Simplified Box Orbitals (SBOs) that belong to a class of spatially restricted functions which allow the zero differential overlap (ZDO) approximation to be applied with complete accuracy. The original SBOs and their Gaussian expansions SBO-3G form a minimal basis set, which was compared to the standard Slater-type orbital basis set (STO-3G). In the present paper, we have developed the SBO basis functions at double-zeta (DZ) level, and we have assessed the option of expanding the SBO-DZ as a combination of Gaussian functions. Finally, we have determined the quality of the new basis set by comparing the molecular properties calculated with SBO-nG with those achieved with some standard basis sets.     

On the use of edge cracked short bend beam specimen for PMMA fracture toughness testing under mixed-mode I/II

In this paper an inclined edge cracked short beam specimen subjected to symmetric three-point bend loading was designed and examined for conducting mixed-mode I/II fracture toughness experiments. The aspect ratio (i.e. length to width ratio) and the loading span distance are considered much lower than the other conventional cracked bend beam samples. Crack tip parameters such as stress intensity factors and T-stress were computed numerically for this specimen by several finite element analyses and it was demonstrated that the specimen is able to produce full combinations of mode I and II including pure mode II. The practical capability of the short bend beam specimen was studied experimentally by conducting a set of mixed-mode fracture tests on PolymethylMethacrylate (PMMA) as a well-known model brittle material. The critical stress intensity factors, the direction of fracture kinking and the path of fracture trajectory were investigated both experimentally and theoretically using two stress and strain-based fracture criteria. The fracture toughness of tested PMMA was decreased by moving towards mode II case due to the effect of T-stress on the fracture mechanism of the short bend beam specimen.     

变刚度层叠梁的力学性能研究

为满足不同场景下的功能需求，变刚度结构得到越来越广泛的应用．以机器人手臂为例，在执行操作时，需要其手臂的结构刚度足够大，避免出现过大的扭曲和变形，而在与人交互时，又需要其结构足够柔软，以保证在此过程中与人交互的安全性．该类变刚度结构可根据需求通过外部激励在柔性和刚性状态之间自由切换．在该文章中，研究分析了层叠梁结构，通过理论推导和数值模拟，对其力学性能做出了很好的预测，同时为此类结构的研究提供了有效可靠的思路和方法．     

Dispersion and localisation in structured Rayleigh beams

This paper brings a comparative analysis between dynamic models of couple-stress elastic materials and structured Rayleigh beams on a Winkler foundation. Although physical phenomena have different physical origins, the underlying equations appear to be similar, and hence mathematical models have a lot in common. In the present work, our main focus is on the analysis of dispersive waves, band-gaps and localised waveforms in structured Rayleigh beams. The Rayleigh beam theory includes the effects of rotational inertia which are neglected in the Euler–Bernoulli beam theory. This makes the approach applicable to higher frequency regimes. Special attention is given to waves in pre-stressed Rayleigh beams on elastic foundations.     

Kinematics of layered reinforced-concrete planar beam finite elements with embedded transversal cracking

In this work crack formation and development is addressed and implemented in a planar layered reinforced-concrete beam element. The crack initiation and growth is described using the strength criterion in conjunction with exact kinematics of the interlayer connection. In this way a novel embedded-discontinuity beam finite element is derived in which the tensile stresses in concrete at the crack position reaching the tensile strength will trigger a crack to open. Since the element is multi-layered, in this way the crack is allowed to propagate through the depth of the beam. The cracked layer(s) will involve discontinuity in the cross-sectional rotation equal to the crack-profile angle, as well as a discontinuity in the position vector of the layer’s reference line. A bond–slip relationship is superimposed onto this model in a kinematically consistent manner with reinforcement being treated as an additional layer of zero thickness with its own material parameters and a constitutive law implemented in the multi-layered beam element.